Description
Weld Star – ER 80S-Ni2 TIG Wire (1.6mm) 5kg
Weld Star – ER 80S-Ni2 TIG Wire is a copper-coated, Ni-alloy solid wire designed specifically for low-temperature, fine-grained, and austempering steels. With the addition of 1.0% Nickel, this wire offers excellent impact toughness, making it especially suitable for the offshore industry. It exhibits superior mechanical properties even at sub-zero temperatures as low as -50 degrees Celsius.
Features and Benefits:
- Nickel Addition: Contains 1.0% Nickel, enhancing its impact toughness.
- Low-Temperature Performance: Exhibits good mechanical properties at sub-zero temperatures down to -50°C.
- High-Quality Production: Made with virgin raw materials sourced from specialized steel mills, ensuring consistent reliability and quality.
- Versatility: Suitable for a wide range of applications including offshore, construction, transport, and more.
Common Applications:
- Offshore Industry: Especially designed for offshore applications due to its resilience and toughness.
- Construction: Used in the building of cranes, transport facilities, tanks, and industrial facilities.
- General Equipment: Suitable for equipment building, pipelines, shipbuilding, and more.
Typical Base Materials:
A106, A515, A714, A131, A369, A210, L290, P235 T1/T2, P275 T1; L360, L415; P275T2, P355N; X-42, X46, X62, X60; P235GH, P355GH; A283, A285, A414, A372, A662, S275, S420, A516, A255, A333, A350, A612 (Illustrative, not exhaustive list).
Standards
EN ISO14341-A – G 3Ni1
AWS A5 28 – ER 80S-Ni2
Chemical Composition % (Typical)
C% | 0.09 |
Si% | 0.70 |
Mn% | 1.20 |
P% | <0.150 |
S% | <0.150 |
Cu% | <0.25 |
Cr% | <0.15 |
Ni% | 1.00 |
Mo% | <0.15 |
Al% | <0.200 |
V% | <0.030 |
Zr+Ti% | <0.50 |
Mechanical Properties (Typical)
Tensile Strength | 600 MPa |
Yield Strength | 480 MPa |
Elongation | 26% |
Impact Strength | 100 J |
Test Temperature | -50°C |
Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors
Shielding Gases
EN ISO 14175 – TIG: I1 (Argon)
Welding Positions
EN ISO 6947 – PA, PB, PC, PD, PE, PF
Liability: Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, this information is subject to change without notice and can be only considered as suitable for general guidance.
Reviews
There are no reviews yet