Description
Weld Star – ER 100S-G Wire (1.0mm) 15kg
Weld Star ER 100S-G Wire, with a diameter of 1.0mm and weighing 15kg, is a NiCrMo fine-grained steel wire crafted for low-temperature, high-strength applications. This wire is renowned for its extreme crack resistance, high mechanical properties, and exceptional welding characteristics.
Key Features:
- NiCrMo Fine-Grained Steel: Specifically designed for low-temperature, high-strength applications, ensuring durability and resilience.
- Crack Resistance: The alloy is formulated to be extremely resistant to cracks, ensuring longevity and reliability of the welds.
- High Impact Strength: Demonstrates impressive impact strength even at sub-zero temperatures, going down to -50°C.
- Precision Layer Wound: This design ensures a superior and consistent wire feeding experience during the welding process.
- Virgin Raw Materials: The green wire is produced using virgin raw materials from specialized steel mills, ensuring consistent quality and reliability.
Common Applications:
Weld Star ER 100S-G Wire is versatile and is typically used for:
- Means of transport and ground movement.
- Building industry operations.
- Bridge construction.
- Tank fabrication.
- Railway transport tasks.
- Mining industry requirements.
- Shipbuilding.
Typical Base Materials:
T1, T1A, T1B, StE 460, StE590, X60, X65, X70, X80, S460, S500, S550, S620, Weldox 500 (Illustrative, not exhaustive list).
| Standards |
| EN ISO16834-A – G 55 5 M21 Mn3NiCrMo |
| AWS A5 28 – ER 100S-G |
| Chemical Composition % (Typical) | ||||||
| C% | Si% | Mn% | P% | S% | Cu% | Cr% |
| 0 08 | 0 75 | 1 40 | <0 015 | <0 015 | <0 25 | 0 55 |
| Ni% | Mo% | Al% | V% | Ti% | Zr% | |
| 0 60 | 0 25 | <0 020 | <0 020 | <0 050 | <0 050 | |
| Mechanical Properties (Typical) |
||
| Tensile Strength | 730 MPa | |
| Yield Strength | 640 MPa | |
| Elongation | 20% | |
| Impact Strength | 50 J | |
| Test Temperature | -50 degC | |
Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors
| Welding Parameters | ||
| Ømm | Current (A) | Voltage (V) |
| 0 80 mm | 90-160 | 18-22 |
| 1 00 mm | 150-250 | 22-28 |
| 1 20 mm | 220-320 | 26-32 |
Shielding Gases
EN ISO 14175 – C1, M20, M21, M33
Welding Positions
EN ISO 6947 – PA, PB, PC, PD, PE, PF, PG
| Packaging Data | |||
| Diameter |
Weight | Spool | Pallet Qty |
| 0 80 mm 1 00 mm 1 20 mm |
15 Kg 15 Kg 15 Kg |
D300 D300 D300 |
72 72 72 |
Liability: Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, this information is subject to change without notice and can be only considered as suitable for general guidance.
Reviews
There are no reviews yet