Description
Weld Star – CF2 (G3Si1) Endurance Pac (0.8mm) 250kg
Weld Star CF2 (G3Si1) Endurance Pac is a non-copper coated solid wire designed for high volume welding applications. This environmentally friendly wire is suitable for welding unalloyed and low-alloyed carbon-manganese steels. With its stable arc, it is optimized for increased welding speeds, ensuring high-quality welds with minimal spatter. The wire is produced using virgin raw materials, ensuring consistent quality and reliability.
Features and Benefits:
- High Productivity Solution: Bulk wire drum system designed for continuous high volume welding applications.
- Environmentally Friendly: Reduces fumes and smoke compared to traditional copper wires.
- Stable Arc: Offers advantages when working with increased welding speeds, resulting in high-quality welds with almost no spatter.
- Superior Weld Quality: Good mechanical properties even at sub-zero temperatures down to -40ºC.
- Consistent Quality: Produced using virgin raw materials from specialized steel mills.
Common Applications:
- Boilers and Industrial Machinery
- Bridges and Shipbuilding
- Automotive and Rail
- Structural and Engineering Fabrications
Typical Base Materials
S185, S235, S275, S355 – Grade A, B, D, AH32 to DH36 – L210, L240, L290, L360, L240NB, L290NB, L360NB, L360QB, L240MB, L290MB, L360MB, L415MB – X42, X46, X52, X60 – P235T1, P235T2, P275T1 – P275T2, P355N – P235GH, P265GH, P295GH, P355GH – S275, S355, S420, S275M, S275ML, S355M, S355ML, S420M, S420ML*
* Illustrative, not exhaustive list
| Standards |
| EN ISO 14341-A – G 42 3 C1 / G 42 4 M21 3Si1 |
| AWS A5.18 – ER 70S-6 |
| Chemical Composition % (Typical) | |||||
| C% | Si% | Mn% | P% | S% | Cu% |
| 0.07 | 0.85 | 1.45 | <0.025 | <0.025 | 0.010 |
| Cr% | Ni% | Mo% | Al% | V% | Zr+Ti% |
| <0.15 | <0.15 | <0.15 | <0.020 | <0.030 | <0.15 |
| Mechanical Properties (Typical) |
||
| Shielding Gas | C1 | M21 |
| Tensile Strength | 540 MPa | 580 MPa |
| Yield Strength | 440 MPa | 460 MPa |
| Elongation | 30% | 26% |
| Impact Strength | 70 J | 90 J |
| Test Temperature | -30ºC | -40ºC |
Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.
| Welding Parameters | ||
| Ømm | Current (A) | Voltage (V) |
| 0.80 mm | 60-200 | 18-24 |
| 1.00 mm | 80-300 | 18-32 |
| 1.20 mm | 120-380 | 18-34 |
Shielding Gases
EN ISO 14175 – C1, M21
Welding Positions
EN ISO 6947 – PA, PB, PC, PD, PE, PF, PG
| Packaging Data | |||
| Diameter |
Weight | Pallet Qty |  |
| 0.80 mm
1.00 mm 1.20 mm |
250 Kg
250 Kg 250 Kg |
4
4 4 |
|
Liability:Â Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, this information is subject to change without notice and can be only considered as suitable for general guidance.
Reviews
There are no reviews yet