Description
TS 400 YS Diesel Welder Generator, 1500 rpm
Features
- D.C. Arc welding source with electronic regulation of welding current and arc force
- Double welding range for versatile welding applications
- Welding control panel “EVO CONTROL” for precise control and adjustments
- Arc Gouging socket for convenient arc gouging operations
- A.C. generator capable of providing both single-phase and three-phase power, available even during welding
- Engine control digital module for efficient engine performance
- VRD (Voltage Reduction Device) available with EVO INSTRUMENT model
- Central lifting eye for easy lifting and transportation
- Wide access for simplified maintenance procedures
- Complies with EC directives for noise and safety standards
| Specification | Value |
|---|---|
| Engine Model | YANMAR 4TNV88 |
| Stand-by net power | 18 kW (24.5 hp) |
| PRP net power | 16.4 kW (22.3 hp) |
| COP net power | |
| Cylinder / Displacement | 4/ 2.19 lit. |
| Bore / Stroke | 88 / 90 (mm) |
| Compression ratio | 20 : 1 |
| BMEP | LTP – PRP |
| Speed governor type | Mechanical |
| Fuel consumption (lit./h) | |
| 110 % (Stand-by power) | 5 |
| 100 % of PRP | 4.5 |
| 75 % of PRP | 3.4 |
| 50 % of PRP | 2.6 |
| 25% of PRP | |
| Cooling system (lit.) | 2.7 |
| Total system capacity – only engine | 50 m³/min |
| Lubrication system | |
| Total oil system capacity (lit.) | 3.4 (min) – 7.4 (max) |
| Oil capacity in sump at 1500 rpm (lit.) | |
| Oil consumption at full load | |
| Exhaust system | |
| Maximum exhaust gas flow ( degC) | 520 |
| Max. exhaust gas temp. (kPa) | 9.8 (0.1 bar) |
| Maximum back pressure (external diameter) | |
| Electrical system | |
| Starter motor power | 1.4 kW |
| Battery charging alternator capacity | |
| Cold start | |
| Air filter | Dry |
| Combustion air flow | 1.48 m³/min |
| Heat rejected at full load | |
| To exhaust system | |
| To water and oil | |
| Radiated to room | |
| To charge cooler |
Reviews
There are no reviews yet