Description
TS 275 EVO Control – Site Ready Package
Site Ready Packages includes: Welder Generator, Wheel Kit, Welding Lead Set, Auto darkening Welding Visor, Welding Gauntlets, Chipping Hammer, Wire Brush
FEATURES
- D.C. Arc welding source with electronic regulation of welding current and arc force
- Equipped with a welding control panel called “EVO CONTROL” for precise control and adjustments
- Features an A.C. generator that can provide both single-phase and three-phase power, even during welding operations
- Includes an engine control digital module for efficient engine performance
- Designed with a bunded base to contain any potential spills or leaks
- Base plate is equipped with forklift pockets for easy transportation
- Canopy has a large opening, enabling convenient maintenance tasks such as replacing air, oil, and fuel filters
- Comes with a large fuel tank for extended operation
- Includes a fuel level sensor for monitoring the fuel level
- External plugs are provided for easy oil and water drainage
- Equipped with an emergency stop button for immediate shutdown in critical situations
- Features a central lifting eye for easy lifting and transportation
- Provides wide access for simplified maintenance procedures
- Complies with EC/UE directives to meet European safety and regulatory standards
| Specification | Value |
|---|---|
| Engine | 4 STROKE, NATURAL ASPIRATED |
| Model | KOHLER KDW702 |
| Stand-By net power | 10.3 kW (14 hp) |
| PRP net power | 9.3 kW (12.6 hp) |
| COP net power | / |
| Cylinders / Displacement | 2 / 686 cm³ (0.686 lt.) |
| Bore / Stroke | 75 / 77,6 (mm) |
| Compression ratio | 22.8 :1 |
| BMEP | (Brake Mean Effective Pressure : LTP – PRP) / |
| Speed governor type | Mechanical |
| Fuel Consumption | |
| 110 % (Stand-by power) | 3.8 lt./h |
| 100 % to PRP | 3.4 lt./h |
| 75 % to PRP | 2.6 lt./h |
| 50 % to PRP | 1.9 lt./h |
| Cooling System | |
| Total system cap. – only engine lt | – 1.1 lt |
| Fan air flow | 72 m³/min. |
| Lubrication system | |
| Total oil system capacity | / |
| Oil capacity in sump | 1.6 lt |
| Oil consumption at full load | / |
| Exhaust System | |
| Maximum exhaust gas flow | 2.2 m³/mim. |
| Max. exhaust gas temp. | 540 degC |
| Maximum back pressure | 60 kPa (0.6 bar) |
| External diameter exhaust pipe | / |
| Electrical System | 12 Vdc |
| Starter motor power | 1.6 kW |
| Battery charging alternator cap. | 40 A |
| Cold start | – 10 degC |
| With cold start aid | / |
| Air Filter | Dry |
| Combustion air flow | 1.02 m³/min. |
| Heat Rejected at Full Load | |
| To exhaust system | / |
| To water and oil | / |
| Radiated to room | / |
| To charge cooler | / |
Reviews
There are no reviews yet