Description
ESAB Caddy MIG C160i Welding Unit with 3m Torch
Portable MIG/MAG welding unit with built-in wire feeder for Ø200 mm spools. Caddy® Mig C160i is used for MIG/MAG welding of mild steels for repair, maintenance and assembly work.
This easy to use and powerful unit offers excellent welding properties and is easy to take along to the job at hand. Great if you are welding in the workshop or on the move.
With Caddy® Mig C160i you only need to set the plate thickness before staring to weld. Hotter or colder welds can easily be obtained by using the heat adjustment knob.
Caddy® C160i is used for MIG/MAG welding of mild steels for repair, maintenance and assembly work. This easy to use and powerful unit, offers excellent welding properties and is easy to take along to the job at hand. Great if you are welding in the workshop or on the move.
Included in Package
- 3 m torch
- 3 m mains cable with plug
- 4.5 m gas hose with hose clamp and quick connector
- Return cable with clamp
- Simple shoulder strap
- Fitted wear parts in torch/feeder (for 0.8 mm wire)
- Instruction manual
- 1 kg OK Autrod 12.51, 0.8 mm wire included
Advanced design gives you options.
Advanced and modern materials provide lightweight, durable, and impact-resistant housing with inbuilt cable wraps for ease of transportation. The low weight of 11.4 kg makes it easy to move to different indoor or outdoor worksites.
Applications
The performance of this unit makes it a superb choice for mild steel welding applications. Perfect for tradesmen working with repair, maintenance, or assembly work in the workshop, outdoors, or at different sites. Single-phase mains connection makes it easy to find an electricity supply. Works equally as well when powered by a portable generator.* The Caddy® Mig C160i has optimized performance for welding with 0.8 mm wire on mild steels using solid or cored wires.
Automatic function and simplicity
With Caddy® Mig C160i, you only need to set the plate thickness before starting to weld. Hotter or colder welds can easily be obtained by using the heat adjustment knob.
Caddy Mig C160i has an efficient built-in inverter power source. Inside the side panel, there is a wire feeder as well as space for the wire spool.
Spool type needed
Wire spool size: inner diameter 51 mm, external diameter 200 mm, and width 55 mm.
Recommended wires/gas
- ESAB’s OK Autrod 12.51 diameter 0.8 mm, for welding mild steels. A high-quality copper-coated wire for excellent mild steel welding results.
- ESAB’s Coreshield 15, diameter 0.8 mm, for welding mild steels. A cored wire that builds a slag protection and therefore needs no gas to weld a large variety of mild steels. Change polarity for the best result.
Specifications
Application Classification | S |
MCableX | 3 x 2.5 |
Operating Temp | -10 – +40°C |
Standards | IEC/EN 60974-1, EN 60974-05, EN 60974-10 |
Power Specifications
Current Range (A) | 30-160 A |
Efficiency at Maximum Current | 82% |
Max Output (A) | 160 A |
Open Circuit Power (W) | 15 W |
Open Circuit Voltage | 60 VDC |
Power Factor at Maximum Current | 0.99 |
Protection Class | IP23C |
Duty Cycle | 35% |
Output Current (A) | 150 A |
Output Voltage (V) | 20.5 V |
Temperature | 40°C |
Frequency (Hz) | 50/60 Hz |
Phase | 1 |
Voltage (V) | 230 (±15%) V |
Wire Feeder Specifications
Max Spool Diameter | 20 mm |
Wire Feed Speed | 2 – 11 m/min |
Wire Spool Capacity | 5 kg |
Weight and Dimensions
Dimensions | 449 x 198 x 347 mm |
Description or Qualifier | w/torches & cables |
Weight | 11.4 kg |