Description
DSP 500 YS Diesel Welder Generator, 1500 rpm
Features
- D.C. Arc welding source
- Electronic regulation of welding current and arc force
- Specific welding programs for cellulose electrodes
- Double welding range
- Digital Ammeter/voltmeter welding
- A.C. generator, single-phase and three-phase also available while welding
- Engine control digital module
- Central lifting eye
- Wide access for easy maintenance
- Meets EC directives for noise and safety
| Model | YANMAR 4TNV88 |
|---|---|
| Stand-By net power | 18 kW (24.5 hp) |
| PRP net power | 16.4 kW (22.3 hp) |
| COP net power | / |
| Cylinders / Displacement | 4 / 2.19 lit |
| Bore / Stroke | 88 / 90 (mm) |
| Compression ratio | 20 : 1 |
| BMEP (Brake Mean Effective Pressure : LTP – PRP) | / |
| Speed governor type | Mechanical |
| Fuel consumption | |
| 110% (Stand-by power) | 5 lit./h |
| 100% to PRP | 4.5 lit./h |
| 75% to PRP | 3.4 lit./h |
| 50% to PRP | 2.6 lit./h |
| Cooling system | |
| Total system cap. – only engine | 7 lit. – 2.7 lit. |
| Fan air flow | 50 m³/min. |
| Lubrication system | |
| Total oil system capacity | / |
| Oil capacity in sump | 3.4 lit. (min) – 7.4 lit. (max) |
| Oil consumption at full load | / |
| Exhaust system | |
| Maximum exhaust gas flow | / |
| Max. exhaust gas temp. | 520 degC |
| Maximum back pressure | 9.8 kPa (0.1 bar) |
| External diameter exhaust pipe | / |
| Electrical system | |
| Starter motor power | 1.4 kW |
| Battery charging alternator cap. | 40 A |
| Cold start | – 15 degC |
| With cold start aid | / |
| Air filter | Dry |
| Combustion air flow | 1.48 m³/min. |
| Heat rejected at full load | |
| To exhaust system | / |
| To water and oil | / |
| Radiated to room | / |
| To charge cooler | / |
Reviews
There are no reviews yet