Double Inflatable Purge Bag System x 16″

PB16

£232.00 ex VAT £278.40 inc VAT

Brand: TAG
Product Model:
PB16
Availaibility:
In Stock

Description

Double Inflatable Pipe Weld Purging System x 16″ 

Sizing and specification 

PART Nº    NOMINAL    PIPE SIZE     WEIGHT    INTERNAL DIAMETER RANGE

PB16          400 mm            16”            1.7 kg              380 – 405 mm

Used for 90% of the traditional pipe weld purging applications to provide bright, shiny, oxide free weld roots. The Pipe Purge Bag Systems are quick and easy to use providing a very rapid weld purge. High quality materials are used in the manufacture of these systems guaranteeing perfect oxide-free weld roots in very little time. 

Due to the design of these systems, the volume of gas used to purge is minimised, resulting in significant savings in both time and the quantity of inert gas used. Return on investment can be achieved in as little as just one or two welds. These robust systems can be used over and over again paying for themselves in very little time.

Features and advantages 

• Inflatable Pipe Purging Systems dramatically reduce purging times leading to significant savings in labour costs. Typical purge times for 4” pipe = 1½ mins; 8” pipe = 4 mins; 12” pipe = 8 mins

• Ready to use, connects to a dedicated and regulated gas supply. Choose any flow rate up to 20l a min. Through the preset purge valve.

• Gas pressure control ensures an even positive root bead with no notching.

• Quick and easy to install simplifying the process of inert gas purging.

• Heat resistant up to 70ºc continuously.

• Use less inert gas. The volume of purge gas used is less than 2% of that required for a conventional purge.

4” Purge Bag System

Luminous strip allows the operator to locate the centre of the bag system to the weld gap with ease.

How it works 

The Purge Bag Systems in the range manufactured by PIPE Ltd are designed around the principle of using 2 dams to create a seal either side of the weld, just far enough away from the weld not to be effected by heat but close enough to the joint to provide the fastest weld purge time. These dams are connected by an armoured spinal tube.

Once ready to start purging, the system is inserted into the bore of the pipe using the luminous strip to centre the system to the weld gap.

When the gas flow is started, the dams inflate and, upon reaching the pre-set pressure, the valve releases the gas gently into the weld chamber, to purge the interspace without turbulence.

The Oxygen is removed from the weld chamber through the integral exhaust tubes in the bags.

Used in conjunction with  Oxygen Monitors to indicate when the required low level of oxygen has been reached, welding can then commence, with the inert gas enabling the welder to produce an even oxidation free penetration weld bead. Afterwards, the dams are deflated simply by disconnecting the purge gas feed and the system easily withdrawn. The design of these systems means that only one gas connection is required for both dam inflation and weld purging.

PBS401 30 metre argon feed hose assembly for connecting PIPE Purge Bag System to dedicated and regulated gas supply. Fitted at one end with a 3/8” female gas regulator connector and at the other end with a fitting to attach to the inflation hose.

Full technical specification can be found in Documents section

 

A carriage charge is applied to orders, for standard 1-2 day shipments to mainland destinations within the United Kingdom. Other destinations and premium services are available but subject to additional freight charges.

Reviews

There are no reviews yet.

Be the first to review “Double Inflatable Purge Bag System x 16″”

Your email address will not be published. Required fields are marked *