Description
Spec Master HPS 600 Panel Mounted Inert Gas Regulator- 3960041403
Spec Master HPS600 series single stage diaphragm cylinder regulators are designed for primary pressure gas control of non-corrosive or toxic, high purity gases up to grade 6.0 purity (99.9999%), on applications where slight variation from decreasing cylinder pressure is acceptable.
Cylinder Regulator, FFKM Pressure Relief Valve
Features
- 6 Port Configuration
- Front and Rear Panel Mounting capabilities
- Encapsulated Seat design
- Low wetted surface area
- Full range of inlet and out let fittings [see spec sheet below]
- Base, or Side Entry
Materials
Body | Nickel Plated Brass Barstock |
Bonnet | Nickel Plated Brass Barstock |
Diaphragm | 316L Stainless Steel |
Seal | PTFE |
Seat | PCTFE |
Filter | 10 Micron 316L Stainless Steel |
Specification
Maximum Inlet Pressure | 300 bar (4350 PSI)* |
Delivery Pressure Range | 3.5 bar (50 PSI) |
Gauges | 50mm (2”) Diameter |
Ports | 1/4” NPT Female |
Temperature Range | -20°C to +60°C (-4°F to +140°F) |
Flow Coefficient (Cv) | 0.1 |
Helium Leak Integrity | 1 x 10-9 mbar l/s |
Weight | 1.2 kg (2.7 lb)** |
* Subject to cylinder connection ** Cylinder connection not included
Please note: If you require a test certificate with your regulator, it must be ordered at the same time. Our certification product can be found here: Gas Arc Regulator Test Certificate
Data Sheet can be found in Documents Section
Reviews
There are no reviews yet