Tech Master GPS400 Series - Single Stage 2 Gauge Cylinder Regulator (Inert) - 10 bar, Grade 4.5

4.5 Purity Single Stage Brass Barstock Diaphragm Cylinder Regulator

Comprising of: Cylinder Connection, Cylinder Contents Gauge, Outlet Pressure Gauge, Outlet Connection

Please note: If you require a test certificate with your regulator, it must be ordered at the same time. Our certification product can be found here: Gas Arc Regulator Test Certificate

The Tech Master GPS400 Series single stage diaphragm cylinder regulators are designed for primary pressure gas control of non-corrosive or toxic, technical gases up to grade 4.5 purity (99.995%), on applications where slight variation from decreasing cylinder pressure is acceptable.

Key Features

• Five port configuration
• Rear panel mounting capabilities
• Encapsulated seat design
• Low wetted surface area
• BS 341 No.30 (Side Entry) Inlet
• 3/8BSP Male Right Hand Outlet
• Full range of other inlet and outlet fittings available (see model selector chart below)

Gas Compatibility

This regulator is configured for Inert gasses, it is also available for the following gas types:

• Fuel
• Propane
• Oxygen/Inert
• Oxygen
• CO2

Flow Performance

Drawings

Model No. Selector Guide

For custom configuration please use the following table to create a model number and contact us for our best price (Example Model Number: GPS400-02-02-00-00-000-00-A)