Description
HPS600 Panel Mounted Inert Gas regulator 0-6 Bar (3960062453)
Designed for primary pressure gas control of non-corrosive or toxic, high purity gases up to grade 6.0 purity (99.9999%), on applications where slight variation from decreasing cylinder pressure is acceptable.
Single Stage Diaphragm Cylinder Regulator, FFKM Pressure Relief Valve.
6.0 Purity Single Stage Nickel Plated Brass Barstock Diaphragm Cylinder Regulator.
Features
- Panel mounted inert gas regulator.
- Adjustable 0-6 bar pressure range.
- Easy installation.
- Six port configuration
- Front and rear panel mounting capabilities
- Encapsulated seat design
- Low wetted surface area
- Full range of inlet and outlet fittings
- Base and side entry
Materials
Body | Nickel Plated Brass Barstock |
Bonnet | Nickel Plated Brass Barstock |
Diaphragm | 316L Stainless Steel |
Seal | PTFE |
Seat | PCTFE |
Filter | 10 Micron 316L Stainless Steel |
Specifications
Maximum Inlet Pressure | 300 bar (4350 PSI)* |
Delivery Pressure Range | 6 bar (90 PSI) |
Gauges | 50mm (2”) Diameter |
Ports | 1/4” NPT Female |
Temperature Range | -20°C to +60°C (-4°F to +140°F) |
Flow Coefficient (Cv) | 0.1 |
Helium Leak Integrity | 1 x 10-9 mbar l/s |
Weight | 1.2 kg (2.7 lb)** |
* Subject to cylinder connection ** Cylinder connection not included
Note #1: This Regulator is without Gauges and Fittings
Note #2: If you require a test certificate with your regulator, it must be ordered at the same time. Our certification product can be found here: Gas Arc Regulator Test Certificate
Data Sheet can be found in Documents Section
Reviews
There are no reviews yet