{"id":4591,"date":"2014-10-23T13:34:12","date_gmt":"2014-10-23T12:34:12","guid":{"rendered":"http:\/\/weldingandwelder.dancing-badger.co.uk\/?product=hose-coupler-bent-38-x-14-rh"},"modified":"2024-02-13T11:35:50","modified_gmt":"2024-02-13T11:35:50","slug":"hose-coupler-bent-38-x-14-rh","status":"publish","type":"product","link":"https:\/\/www.weldingandwelder.com\/product\/hose-coupler-bent-38-x-14-rh\/","title":{"rendered":"Hose Coupler Bent 3\/8″ x 1\/4″ RH – Pack of 10"},"content":{"rendered":"
Hose Coupler Bent 3\/8″ (10 mm) x 1\/4″ (6 mm) RH – Pack of 10<\/strong><\/p>\n The adaptor is used to connect a hose with a 3\/8″ fitting to a 1\/4″ attachment on gas equipment (e.g. a lightweight style shank), or<\/p>\n to connect a hose with a 1\/4″ fitting to a 3\/8″ attachment on gas equipment (e.g. a regulator outlet or a Type 3, 4 or 5 style shank).<\/p>\n FURTHER INFORMATION\u00a0<\/strong><\/p>\n Straight adapters are used to convert the thread size of BSP hose fittings in order to enable them to be connected to 3\/8″ BSP HD shank fittings.<\/p>\n Bent adapters are used to convert the thread size of 3\/8″ BSP hose fittings in order to enable them to be connected to 1\/4″ BSP LW shank fittings.<\/p>\n A bent adaptor is sometimes preferred as a device for directing the hoses away from the shank or cutter, so as not to allow the hoses to impair movement of the equipment when welding.<\/p>\n The adapters are available in left hand (LH) and right hand (RH) versions for fuel and inert gas respectively<\/p>\n Range<\/strong><\/p>\n Pack of 10<\/p>\n<\/div>\n","protected":false},"excerpt":{"rendered":"\n
\n