{"id":28054,"date":"2023-03-30T17:18:46","date_gmt":"2023-03-30T16:18:46","guid":{"rendered":"https:\/\/www.weldingandwelder.com\/?post_type=product&p=28054"},"modified":"2024-02-13T11:39:10","modified_gmt":"2024-02-13T11:39:10","slug":"weld-star-er-120s-g-tig-wire-2-4mm-5kg","status":"publish","type":"product","link":"https:\/\/www.weldingandwelder.com\/product\/weld-star-er-120s-g-tig-wire-2-4mm-5kg\/","title":{"rendered":"Weld Star – ER 120S-G TIG Wire (2.4mm) 5kg"},"content":{"rendered":"
Weld Star – ER 120S-G TIG Wire is a copper-coated wire enriched with NiCrMo, specifically tailored for welding ultra-high tensile strength steels. This wire is particularly suitable for fine grain steels that exceed 890 MPa in yield strengths. With its high impact strength at low temperatures and exceptional plasticity of the weld deposit, it is versatile for a wide range of applications.<\/p>\n
S890QL, S960Q; P460NH, P460NL1; Weldox 900, Weldox 960, Strenx 960 (Illustrative, not exhaustive list).<\/p>\n
Standards<\/strong><\/td>\n<\/tr>\nEN ISO16834-A – Mn4Ni2,5CrMo<\/td>\n<\/tr>\n | AWS A5 28 – ER 120S-G<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n | Chemical Composition % (Typical)<\/strong><\/h3>\nC%<\/td>\n | 0.110<\/td>\n<\/tr>\n | Si%<\/td>\n | 0.70<\/td>\n<\/tr>\n | Mn%<\/td>\n | 1.90<\/td>\n<\/tr>\n | P%<\/td>\n | <0.015<\/td>\n<\/tr>\n | S%<\/td>\n | <0.015<\/td>\n<\/tr>\n | Cu%<\/td>\n | <0.25<\/td>\n<\/tr>\n | Cr%<\/td>\n | 0.50<\/td>\n<\/tr>\n | Ni%<\/td>\n | 2.50<\/td>\n<\/tr>\n | Mo%<\/td>\n | 0.50<\/td>\n<\/tr>\n | Al%<\/td>\n | <0.010<\/td>\n<\/tr>\n | V%<\/td>\n | <0.030<\/td>\n<\/tr>\n | Ti%<\/td>\n | 0.08<\/td>\n<\/tr>\n | Zr%<\/td>\n | <0.050<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n | Mechanical Properties (Typical)<\/strong><\/h3>\nTensile Strength<\/td>\n | 1040 MPa<\/td>\n<\/tr>\n | Yield Strength<\/td>\n | 960 MPa<\/td>\n<\/tr>\n | Elongation<\/td>\n | 16%<\/td>\n<\/tr>\n | Impact Strength<\/td>\n | 60 J<\/td>\n<\/tr>\n | Test Temperature<\/td>\n | -40\u00b0C<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n | Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors<\/em><\/p>\n EN ISO 14175 – TIG: I1 (Argon)<\/p>\n EN ISO 6947 – PA, PB, PC, PD, PE, PF<\/p>\n Liability:<\/strong> Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, this information is subject to change without notice and can be only considered as suitable for general guidance.<\/p>\n","protected":false},"excerpt":{"rendered":" |