Description
Wet Tungsten Electrode Grinder (MasterPoint Ultimate)
RPM: 8500/MIN – GRINDING SPEED: 44 M/SEC
Constructed with a unique disposable container that automatically collects all toxic dust particles, the container is replaceable.
Cold, wet, high-speed diamond wheel grinding ensures the electrode always has a polished and even surface. The precise angle produced is important to the quality of welding seams and also reduces the number of re-ignitions between grinding, thus prolonging electrode life.
It is very easy to use; just place the electrode in the holder, set the grinding angle, and insert the holder into the combined stick-out/locking device. After grinding and if required, the tip can be flattened by placing the electrode in the 90-degree position.
The MasterPoint Wet is available in 220 and 110 volt versions and comes with 250 ml of grinding liquid, a diamond wheel, electrode clamps (1.6mm – 3.2mm), an electrode holder, a disposable container, and a stainless steel base.
Features
- Eco friendly collection of dust particles
- Perfect grinding for accurate angles
- Combined electrode gauge and locking device ensures minimal removal of electrode
- Motor: 110/220V, 50/60Hz – Motor yield: 380W
- RPM: 8500/min – Grinding speed: 44 m/sec
Specifications
Voltage | AC110V, 220V |
Frequency | 50-60Hz |
Power | 280W |
Motor speed | 4500rpm |
Min grinding length | 15mm |
Tungsten diameter | 0.8 – 4.0mm |
Grinding angle range | 7.5 – 90 degrees |
Reviews
There are no reviews yet