Description
Weld Star – ER 317L Stainless TIG Wire (3.2mm) 5kg
Features and Applications
Austenitic stainless steel wire used for welding alloys of a similar chemical composition.
Ideal for severely corrosive environments where crevice and pitting corrosion are of concern.
Low carbon content reduces the possibilities of intergranular carbide precipitation.
Not suitable for structural service above 400?C or for cryogenic applications.
Weld deposit is similar to 316L with high molybdenum content for increased corrosion resistance.
Typically used in the chemical and petrochemical industries, marine environments, papermaking and food processing industries etc.
Typical Base Materials
- Stainless CrNiMo steels e.g. 317L or similar*
*Illustrative, not exhaustive list
Standards
- EN ISO 14343-A – W 18 15 3 L
- AWS A5.9 – ER 317 / 317L
Chemical Composition % (Typical)
- C%: <0.03%
- Mn%: 1.43%
- Si%: 0.45%
- S%: <0.030%
- P%: <0.030%
- Ni%: 13.60%
- Cr%: 18.82%
- Mo%: 3.55%
- Cu%: <0.75% (?)
- Other elements: Not specified
Mechanical Properties
- Tensile Strength: ≥480 MPa
- Yield Strength: ≥300 MPa
- Elongation: ≥25%
- Impact Strength: Not specified Note: Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.
Shielding Gases
- EN ISO 14175 – TIG: I1 (Argon)
Welding Positions
- EN ISO 6947 – PA, PB, PC, PD, PE, PF, PG
Packaging Data
- Diameter: 1.60 mm, 2.40 mm, 3.20 mm
- Length: 1000 mm for all diameters
- Weight: 5 Kg for all diameters
Liability: Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, this information is subject to change without notice and can be only considered as suitable for general guidance.
Reviews
There are no reviews yet.