Description
Spec Master HPS600 High Purity Cylinder Regulator 0 – 10 Bar (39600002237)
The Spec Master HPS600 Series single stage diaphragm cylinder regulators are designed for primary pressure gas control of non-corrosive or toxic, high purity gases up to grade 6.0 purity (99.9999%), on applications where slight variation from decreasing cylinder pressure is acceptable.
Features
- FKM seal
- Inlet <=300 bar 1/4 NPT Female
- Outlet 0-10 bar 1/4 NPT Female
- Six port configuration
- Front and rear panel mounting capabilities
- Encapsulated seat design
- Low wetted surface area
- Full range of inlet and outlet fittings
- Base and side entry
Material
| Body | Nickel Plated Brass Barstock |
| Bonnet | Nickel Plated Brass Barstock |
| Diaphragm | 316L Stainless Steel |
| Bonnet Seal | PTFE |
| Valve Seat | PCTFE |
| Filter | 10 Micron 316L Stainless Steel |
Specifications
| Maximum Inlet Pressure | 300 bar (4350 PSI)* |
| Delivery Pressure Range | 10 bar (150 PSI) |
| Gauges | 50mm (2”) Diameter |
| Ports | 1/4” NPT Female |
| Temperature Range | -20° C to +60° C (-4° F to +140° F) |
| Flow Coefficient (Cv) | 0.1 |
| Helium Leak Integrity | 1 x 10-9 mbar l/s |
| Weight | 1.2 kg (2.7 lb)** |
Item No. 39600002237
No Inlet, or Outlet fittings
Please note: If you require a test certificate with your regulator, it must be ordered at the same time. Our certification product can be found here: Gas Arc Regulator Test Certificate
Data Sheet can be found in Documents Section
