Sirocco C0² Heater 240 volt

Description

Sirocco C0² Gas Heater

Specifications

The Sirocco is designed to vaporise liquid carbon dioxide from syphon type C0² cylinders where a greater flow rate is required than is available from standard gas take-off cylinders.

The Sirocco screws directly onto the cylinder valve by means of a loose C0²nut and sealing washer. The outlet is threaded C0² male to accept a C0² pressure regulator.

Features

• Carbon Dioxide (C0²), the 2 models available are 100 volt or 240 volt and both have a flow rate of approximately 28 LPM (60 CFH).
• Compact design, the compact robust casing ensures maximum service life and minimal maintenance.
• A safety bursting disc is incorporated in the body of the unit which ruptures at 190 bar to safeguard the vaporiser from overpressure.
• A thermostatically controlled element protected by a heat fuse ensures that the heater provides gas on demand and cuts out during the rest periods.
• A neon indicator is incorporated to show when the element is heating.
• CE approved and marked.

Technical Data

• Maximum Flow Rate: 3.2 kg/h (28 l/min)
• Design Pressure: 190 bar
• Inlet Connection: BS341 No.8, female
• Outlet Connection: BS341 No.8, male
• Dimensions: Length: 170mm
• Width: 100mm
• Height: 70mm
• Weight: 1.1 Kg
• Enclosure Rating: IP21
• Power Supply: 230 V AC 200 W 50 Hz