Description
SIFMIG E71T1 Flux Cored MIG Welding Wire x 1.2 mm x 15 Kg
SIFMIG E71T1 Flux Cored MIG Welding Wire, with a diameter of 1.2mm, is commonly utilized in shipyards, offshore environments, and construction applications. It is designed for welding mild steel tube, pipe, strip, forgings, and various pressure-vessel steels. This wire is often chosen as a productivity enhancement, especially when transitioning from low-hydrogen MMA electrode welding. It’s a rutile flux-cored wire suitable for MIG/MAG (GMAW) welding of thin sheet steels or unalloyed/low alloyed structural steels in all positions, using CO2 or a combination of Argon/CO2 as shielding gases. The SIFCORED E71T-1 offers impressive mechanical properties, impact toughness even at low temperatures, minimal spatter, and exceptional weldability. It’s also suitable for applications on prime-coated plates and can be employed in vertical-down welding for non-critical sheet fabrication.
Key Features:
- Rutile flux-cored wire ideal for welding thin sheet steels or low alloyed structural steels in all positions.
- Uses Argon/CO2 shielding gas.
- Supplied on a 15kg spool with a diameter of 1.2mm.
- CE Certified, meeting the requirements of EN1090.
- Delivers good mechanical properties and impact toughness even at low temperatures.
- Offers low spatter and excellent weldability.
Common Applications:
SIFMIG E71T1 Flux Cored MIG Welding Wire is versatile and can be used for:
- Welding in shipyards, offshore environments, and construction sites.
- Welding mild steel tube, pipe, strip, forgings, and pressure-vessel steels.
- Applications on prime-coated plates.
- Vertical-down welding for non-critical sheet fabrication.
Specifications
Product Type | Flux Cored MIG Wire |
Part Number | WO711215 |
Weight | 15 KG |
Diameter | 1.2 mm |
AWS Standard | AWS: A5.20 E71T-1M |
EN ISO Standard | EN ISO 17632-A-T 42 2 P M 1 H5 |
Welding Positions
Suitable for use in all positions, in single- and multi-pass applications under spray-transfer. Produces a smooth, even bead with good slag detachability.
Typical Weld Metal Composition
C | 0.05% |
Si | 0.48% |
Mn | 1.22% |
P | 0.013% |
S | 0.009% |
Typical Mechanical Properties
Ultimate Tensile Strength | 570 N/mm² |
Yield Strength | 510 N/mm² |
Impact Values | 110 J @ -20°C |
Elongation | 30% |
Standards
AWS : E71T-1
EN 758 : T 48 2 P C 1 H10
Reviews
There are no reviews yet