Description
Magswitch MagSquare 1000 (8100099)
Welders and fabricators are raving about all the uses, convenience, and time savings with Magswitch MagSquares. MagSquares are extremely powerful on off magnetic blocks with strong holding force available on all sides.
Welders have never enjoyed this complete control over incredibly strong magnets (1,000 lbs (454 kg) on the MagSquare 1000). You can precisely position the MagSquare and material, and then turn the magnet on. MagSquares feature multiplane workholding capability. It takes away the need for time-consuming manual clamping on so many jobs, and works anywhere there is steel; you don’t need an edge like you do with C-Clamps.
All MagSquares are machined at 90 degrees, have pre-tapped holes on all sides for mounting tools, jigs, and fixtures. A fast 180-degree turn of the knob turns the MagSquare on and off. When off, nothing sticks to them. Once you understand all the uses, the time savings in setups, and the ability to control these powerful magnetic blocks – you will want the entire range.
Features & Benefits
- Magnet turns completely On and Off.
- Magnet stays clean.
- Does not use an electrical power source.
- Holds flat and round surfaces of steel.
- Multiplane magnetic grip on five sides.
- Machined at 90-degrees.
- Pre-tapped holes on four sides for mounting.
Specifications
Max Breakaway | 1052 lbs (477.1 kg) |
Full Saturation Thickness | 0.5” (13 mm) |
2:1 Shear Working Load | 148 lbs (67 kg) |
Product Weight | 7.9 lbs (3.58 kg) |
Dimensions | 4.3 x 2.8 x 5.8 in<br/>(76.2 x 71.1 x 147.3 mm) |
Magnetic Pole Footprint | 72 mm x 108 mm |
Reviews
There are no reviews yet