Crusader Lite Air Fed Paint Spraying & Finishing Helmet

P112-CL

£112.50 ex VAT £135.00 inc VAT


Product Model:
P112-CL
Availability:
In Stock

AIR FED VISOR, acetate visor, belt, adjustable regulator, power take-off for spray hose, warning whistle, gauge and spare visor cover.

Share this product

Description

Crusader Lite Air Fed Paint Spraying & Finishing Helmet

AIR FED VISOR, acetate visor, belt, adjustable regulator, power take-off for spray hose, warning whistle, gauge and spare visor covers.

Air flow rate Adjustment range 170 – 250 litres per minute.
Belt Adjustable from 22″ – 50″ waist.
Belt Buckle Strong ‘Acetal’ material.
Browguard Mix of ABS.
Connections Unit fitted with 1/4″ BSP female thread.
Disposable Visors Pack of spare supplied with each unit manufactured from interwoven polyester for high optical quality and strength (tinted version available).
Field of vision Over 85% field of vision.
Flammability Subjected to a flame at 800 degrees C, no components continue burning when removed from flame.
Hose length & pressures Any length of hose, diameter 3/8″ (9.5mm) may be used provided it can be determined that 3.5 bar with at least 250 litres per minute is available at a distance of 10 meters from the belt mounted pressure regulator.
Hygienic All skin contact points easily replaceable, comfort band and visor with foam seal.
Low flow warning Operates if the air pressure up stream (compressor side) of the belt mounted pressure regulator drops below 3 bar. Whistle and gauge.
Marking Inside visor and Browguard : – CE mark, test standard and visor type.
Nominal Protection Factor 200 (class LDH3).
Noise level at full flow 76 dBA.
Regulator Adjustable regulator gives varied air flow rates between limits specified.
Sounder Sounder powered by air and gives over 90 dBA at ears when activated.
Storage A storage bag is included this will hold the unit and all spares.
Spray hose An optional belt connected spray hose is available enabling use of air powered tools, this is fitted with a rectus (or similar) fitting.
Test Specification BSEN1835 : 2000 CE marked by SGS UK Ltd.
Total Inward Leakage Less than 0.5% (test requirement for class 3 device).
Uses Painting and light finishing.
Visor impact Meets impact rating described in BSEN1835:2000.
Visor protection Offers protection right around to the ears and down to the chin.
Weight of head unit 325 grams (Crusader Lite unit) (1/3rd of the permissible mass described by BS1835:2000 7.11.2)

Q & A

There are no questions yet

Ask a question

Your question will be answered by a store representative or other customers.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Thank you for the question!

Your question has been received and will be answered soon. Please do not submit the same question again.

Error

Warning

An error occurred when saving your question. Please report it to the website administrator. Additional information:

Add an answer

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Thank you for the answer!

Your answer has been received and will be published soon. Please do not submit the same answer again.

Error

Warning

An error occurred when saving your answer. Please report it to the website administrator. Additional information:

A carriage charge is applied to orders, for standard 1-2 day shipments to mainland destinations within the United Kingdom. Other destinations and premium services are available but subject to additional freight charges.

Reviews

There are no reviews yet

Add a review
Crusader Lite Air Fed Paint Spraying & Finishing Helmet Crusader Lite Air Fed Paint Spraying & Finishing Helmet
Rating*
0/5
* Rating is required
Your review
* Review is required
Name
* Name is required
Add photos or video to your review
* Please confirm that you are not a robot