Description
Sifalumin No 15 4043A Aluminium TIG Welding Rods – 2.4 mm x 2.5 Kg
Material to be Welded
- Suitable for welding duralumin, cast and wrought alloys 6063 (H9), 6061 (H20) and 6082(H30), as well as other 4 series aluminium.
- The resulting weld will discolour if anodised [If the finished article is to be anodised, use 1050A, or 5356].
- Pre-heating up to 120oC may be necessary, subject to material size and thickness.
- Wire brushing between passes is recommended, to remove build up of surface oxides.
Standards
- EN ISO 18273
- BS: 2901S
- Al 4043A (AlSi5)
- 4043A, (NG21)
Welding Positions
- Ensure that the parent metal surface is cleaned and fully degreased prior to welding.
- Clean joints with a stainless steel brush.
Typical Weld Metal Composition
- Si: 5 %
- Al: Bal
- Melting Point: 635°C
Typical Mechanical Properties
- Ult Tensile Strength 120 N/mm²
Material to be Welded
- Suitable for welding duralumin, cast and wrought alloys 6063 (H9), 6061 (H20) and 6082(H30), as well as other 4 series aluminium.
- The resulting weld will discolour if anodised [If the finished article is to be anodised, use 1050A, or 5356].
- Pre-heating up to 120oC may be necessary, subject to material size and thickness.
- Wire brushing between passes is recommended, to remove build up of surface oxides.
Reviews
There are no reviews yet