Description
Outlet Point Regulator (Single Stage Diaphragm) 0 – 10 Bar
5.0 Purity Single Stage Nickel Plated Brass Barstock Diaphragm
Outlet Point Regulator
The Lab Master LGP500 Series single stage diaphragm outlet point regulators are designed for secondary pressure gas control of non-corrosive or toxic, high purity gases up to grade 5.0 purity (99.999%), on gas distribution systems.
Specification
- Maximum Inlet Pressure 60 bar (870 PSI)
Delivery Pressure Range
- 1.5 bar (22 PSI)
- 3.5 bar (50 PSI)
- 6 bar (90 PSI)
- 10 bar (150 PSI)
- Gauges 50mm (2”) Diameter
- Ports Inlet: 1/4” NPT Female
- Outlet: 1/4” NPT Male
- Temperature Range -20° C to +60° C (-4° F to +140° F)
- Flow Coefficient (Cv) 0.1
- Weight 1.2 kg (2.7 lb)
Material
- Body Nickel Plated Brass Barstock
- Bonnet High Strength Alloy
- Diaphragm 316L Stainless Steel
- Seal PTFE
- Seat Polyamide (Nylon®)
- Filter 10 Micron 316L Stainless Steel
Features
- Three port configuration
- Rear point mounting (1/4 NPT male)
- Encapsulated seat design
- Low wetted surface area
- Full range of inlet and outlet fittings
- Rear entry
Reviews
There are no reviews yet