Description
GA2500/GPS 420 High Pressure Fuel Gas Regulator RAN06004/3960000172
GPS 420 Tech Master 5 port single-stage piston cylinder regulator with FKM seal.
A high pressure regulator that is a robust brass construction to withstand the rigours of daily use.
This product is used in many process control applications and is suitable for both cylinder and manifold mounting.
Widely used for high pressure vessel testing and purging the GA2500 regulator is used for primary pressure regulation in many industrial, laboratory and research applications.
Intended for primary pressure gas control of non-corrosive or toxic, technical grade gases up to grade 4.5 purity (99.995%), on applications where slight pressure variation from decreasing cylinder pressure is acceptable.
Specifications
Type | Single-stage |
Inlet Pressure (max) | 300 bar |
Outlet Pressure | 0-200 bar |
Inlet Connection | BS341 No. 4 (Base Entry) |
Outlet Port | 1/4″ NPT |
Temperature Range | -20°C to +60°C (-4°F to +140°F) |
Maximum Flow | 230 m³/hr @ 15°C in Air at 300 bar inlet |
Weight | 1.8 kg (4.0 lb) |
Pressure Adjusting Knob | White |
Features
- Five port configuration
- Front and rear panel mounting capabilities
- Encapsulated seat design
- Low wetted surface area
- Full range of inlet and outlet fittings
- Base and side entry
Materials
Body | Brass Barstock |
Bonnet | Brass Barstock |
Piston | Brass |
Seal | FKM |
Seat | Nylon |
Filter | 10 Micron 316L Stainless Steel |
Please note: If you require a test certificate with your regulator, it must be ordered at the same time. Our certification product can be found here: Gas Arc Regulator Test Certificate
Data Sheet can be found in Documents Section
Reviews
There are no reviews yet