Description
Devcon 10112 – Plastic Steel Putty (A) – 1 x 500 g
The original metal filled epoxy putty for economical, dependable maintenance and repair work.
- Stock No. 10112
- Package Size: 500g
Application Information
Cure A 12.7mm thick section of Devcon Plastic Steel Putty will harden at 21ºC in 4 hours.
The material will be fully cured in 16 hours at which time the material can be machined, drilled or painted.
The actual cure time of epoxy is determined by the mass used and the room temperature at time of repair.
Typical Physical Properties
| Colour | Grey |
| Mix Ratio by Volume | 2.5:1 |
| Mix Ratio by Weight | 9:1 |
| % Solids by Volume | 100 |
| Pot Life at 25°C (mins) | 45 |
| Specific Volume (CC/Kg) | 429 |
| Cured Shrinkage (cm/cm) | 0.0006 |
| Specific Gravity | 2.33 |
| Temperature Resistance (Dry) | 121°C |
| Coverage (858cm2/Kg @ 5mm) | 5mm (As Required) |
| Cured Hardness (Shore D) | 85 D |
| Dielectric Strength (KV/mm) | 1.18 |
| Adhesive Tensile Shear (MPa) | 19 |
| Compressive Strength (MPa) | 57 |
| Coefficient of Thermal Expansion | 86.4 x10^-6 cm/cm/°C |
| Thickness per Coat (mm) | As Required |
| Functional Cure Time (Hours) | 16 |
| Recoat Time (Hours) | 4 |
| Mixed Viscosity (cps) | Putty (where applicable) |
Reviews
There are no reviews yet