About Auto Changeover Manifolds (2 x 1 / 0 - 6 Bar)
2 x 1 auto changeover manifolds switch between two cylinder supplies automatically so the gas feed is not interrupted. The range includes Gas Arc 2 x 1 Series panels rated at 6 bar for oxygen, inert gas, NEVOC inert gas, CO2, N2O, propane and fuel gas. One oxygen panel is supplied with flexible hose.
Auto Changeover Manifolds (2 x 1 / 0 - 6 Bar)
-
Gas Arc3960014605 2 x 1 Auto Changeover Panels (CO2) 2×1 6 Bar (GCS26115)
3960014605£3,044.61 ex VAT£3,653.53 inc VAT -
Gas ArcGCS26117/3960014612
2 x 1 Auto Changeover Panels (N2O) 2×1 6 Bar (GCS26117)
GCS26117/3960014612£2,815.23 ex VAT£3,378.28 inc VAT -
Gas ArcGCS26075/3960014629
2 x 1 Auto Changeover Panels (Propane) 2×1 6 Bar (GCS26075)
GCS26075/3960014629£2,463.91 ex VAT£2,956.69 inc VAT -
Gas ArcGCS26063/3960014582
2 x 1 Auto Changeover Panels (Fuel Gas) 2×1 6 Bar (GCS26063)
GCS26063/3960014582£2,815.23 ex VAT£3,378.28 inc VAT -
Gas ArcGCS26099/3960014575
2 x 1 Auto Changeover Panels (Inert Gas Nevoc) 2×1 6 Bar – (BS341 No.30 – ISO 5145 No. 30 Connections)
GCS26099/3960014575£2,833.82 ex VAT£3,400.58 inc VAT -
Gas ArcGCS26097
2 x 1 Auto Changeover Panels (Inert Gas) 2×1 6 Bar (GCS26097)
GCS26097£2,517.76 ex VAT£3,021.31 inc VAT -
Gas ArcGCS26091/3960014537
2 x 1 Auto Changeover Panels (Oxygen) 2×1 6 Bar (GCS26091) c/w Flexible Hose
GCS26091/3960014537£2,999.75 ex VAT£3,599.70 inc VAT -
Gas ArcGCS26089/39600
2 x 1 Auto Changeover Panels (Oxygen) 2×1 6 Bar (GCS26089)
GCS26089/39600£2,530.53 ex VAT£3,036.64 inc VAT
8 resultsSorted by popularity
Helpful guides
Welding Productivity: Arc Time, Deposition and Rework Improving welding productivity starts with understanding where the time goes across the whole job.… Read guide 
TIG Welding Defects & Solutions: A Practical Troubleshooting Guide TIG welding, also called GTAW, gives the welder close control over the weld pool… Read guide 
MIG Welding Wire Types: AWS MIG Codes, Uses & Charts The right MIG wire needs to suit both the metal you are welding and… Read guide 
Welding Electrode Ovens and Quivers: Which One You Need If you use low-hydrogen electrodes, keeping the coating dry is part of getting a… Read guide 
