Devcon 1 Minute Epoxy Gel 50ml – Box of 12

DEV14277

£302.61 ex VAT £363.13 inc VAT

Brand: Devcon
Product Model:
DEV14277
Availability:
In Stock

  • Fast-curing without fixturing
  • Fills gaps
  • Non-sagging on vertical surfaces
  • Working time is 45 seconds
  • Bonds metal, glass, ceramics, concrete and wood in seconds
  • Open Time: 45 seconds
  • Fixture Time: 1 minute
  • Gap Fill: 0.01″ – 0.05″
  • Color: Clear
  • Mix Ratio: 1:1
  • Unit Size: 50ml
  • Working Time Min: 0.5
  • Working Time Max: 1
  • Fixture Time Min: 0.25
  • Fixture Time Max: 1

 

Share this product

Description

Devcon 14277 1 Minute Epoxy 50ml Cartridge (12 x 50ml Pack)

  • Stock No.14277
  • Package Size. 12 x 50ml Cartridge

Features

  • Non-sagging on vertical and overhead surfaces
  • 100% reactive, no solvents
  • Part fixturing in less than 1 minute

Recommended applications

  • Ideal for repairing or assembling furniture, jewellery, china, appliances and models
  • Fast cure metal-to-metal bonding and repairs
  • Suitable for bonding metals, glass, fibreglass, fabrics and ceramics

Physical Properties (Uncured)

Colour Translucent
Mixed Viscosity, cps 70,000 cps
Mixed Ratio by Volume 1:1
Mixed Ratio by Weight 1:1
Mixed Density 1.13 gm/cc
Working Time @23°C 45 seconds
Fixture Time @23°C 1 minute
Functional Cure @23°C 30 – 45 minutes
Full Cure 2 hours

Physical Properties – 7 days cured at 24°C

Adhesive Tensile Shear (Steel) ASTM D1002 11 MPa
T Peel 4 – 5 N/10mm
Service Temperature, Dry -40°C to 93°C
Cured Hardness, ASTM D2240 82D
Dielectric Strength, ASTM D2566 19.6 KV/mm
Tensile Elongation 1%
% Solid by Volume 100
Specific Volume 884 cm3/kg

Chemical Resistance – 7 days room temperature cure (30 days immersion)

Acetic (Dilute) 10% Poor
Acetone Poor
Ammonia Poor
Corn Oil Excellent
Cutting Oil Excellent
Ethanol Poor
Petrol (Unleaded) Poor
Hydrochloric 10% Poor
Kerosene Excellent
Mineral Spirits Excellent
Sulphuric 10% Poor
Glycols / Antifreeze Fair
Isopropanol Poor
MEK Poor
Motor Oil Excellent

General Surface Preparation

1 Minute Epoxy works best on clean surfaces. Surfaces should be free of heavy deposits of grease, oil, dirt or other contaminants, or cleaned with industrial cleaning equipment such as vapour phase degreasers or hot aqueous baths. Abrading or roughing the surfaces of metals will increase the microscopic bond area significantly and optimize the bond strength.

  • Mixing: This product is available in cartridge form only.
  • The cartridge should be used with a Manual Applicator Gun and a Static Mixer Nozzle.
  • The Static Mixer Nozzle enables the epoxy to be dispensed, metered and directly applied to the surfaces to be bonded.

Please note: Once the product cures in the nozzle it has to be thrown away and a new nozzle used.

Application

Apply mixed epoxy directly to one surface in an even film or as a bead. Assemble with the mating part within the recommended working time. Obtain firm contact between the parts to minimize any gap and ensure good contact of the epoxy with the mating part. A small fillet of epoxy should flow out the edges to show there is adequate gap filling. For very large gaps, apply epoxy to both surfaces and spread to cover the entire area, or make a bead pattern, which will allow flow throughout the joint.

Let bonded assemblies stand for the recommended functional cure time before handling.

They are capable of withstanding processing forces at this point, but should not be dropped, shock loaded, or heavily loaded.

Storage

Shelf Life

  • Devcon Epoxy Adhesives should be stored in a cool, dry place when not used for a long period of time. A shelf life of 1 year from date of manufacture can be expected when stored at room temperature (22ºC) in their original containers.

Precaution

  • For complete safety and handling information, please refer to Material Safety Data Sheets prior to using this product.

Warranty

  • Devcon will replace any material found to be defective. Because the storage, handling and application of this material are beyond our control, we can accept no liability for the results obtained.

Disclaimer

All information on this data sheet is based on laboratory testing and is not intended for design purposes. ITW Devcon makes no representations or warranties of any kind concerning this data.

MSDS can be found in “DOCUMENTS” section

Q & A

There are no questions yet

Ask a question

Your question will be answered by a store representative or other customers.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Thank you for the question!

Your question has been received and will be answered soon. Please do not submit the same question again.

Error

Warning

An error occurred when saving your question. Please report it to the website administrator. Additional information:

Add an answer

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Thank you for the answer!

Your answer has been received and will be published soon. Please do not submit the same answer again.

Error

Warning

An error occurred when saving your answer. Please report it to the website administrator. Additional information:

 

 

 

Reviews

There are no reviews yet

Add a review
Devcon 1 Minute Epoxy Gel 50ml - Box of 12 Devcon 1 Minute Epoxy Gel 50ml - Box of 12
Rating*
0/5
* Rating is required
Your review
* Review is required
Name
* Name is required
Add photos or video to your review
* Please confirm that you are not a robot

You may also like…

  • Devcon Mark 5™ Application Gun

    20015

    £85.16 ex VAT £102.19 inc VAT